OpenSceneGraph Forum Forum Index OpenSceneGraph Forum
Official forum which mirrors the existent OSG mailing lists. Messages posted here are forwarded to the mailing list and vice versa.
 
   FAQFAQ    SearchSearch    MemberlistMemberlist    RulesRules    UsergroupsUsergroups    RegisterRegister 
 Mail2Forum SettingsMail2Forum Settings  ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
   AlbumAlbum  OpenSceneGraph IRC ChatOpenSceneGraph IRC Chat   SmartFeedSmartFeed 

Is osggis updated? Re: shp file and ive file


 
Post new topic   Reply to topic    OpenSceneGraph Forum Forum Index -> General [3rdparty]
View previous topic :: View next topic  
Author Message
Alejandro Aguilar Sierra
Guest





PostPosted: Fri May 08, 2009 3:12 pm    Post subject:
Is osggis updated? Re: shp file and ive file
Reply with quote

Hi,

Good to know, but recently I tried to compile osggis with the current
OSG and VPB branches. It compiles without a problem, but the example
doesn't work. It is stucked building the example.

Does anybody has been successful building the example?

Regards,

-- A.


2009/5/8 Jason Beverage <>:
Quote:
Hi Andrew,

I would recommend using osgGIS for this. It has the capability to make a
paged database from a vector dataset like a shapefile and clamp it to an
existing terrain database (like an IVE).

http://www.osggis.org

Thanks!

Jason

2009/5/8 Jakob Ruhe <>
Quote:

Hi Andrewxie!

The ESRIShapeReaderWriter plugin can read ESRI shape files so if you
build that plugin and the ive plugin you can convert a shape file with
something like this:

osg::Node* node = osgDB::readNodeFile("myshape.shp");
osgDB::writerNodeFile(*node, "myhsape.ive");

Good luck!

/Jakob Ruhe

2009/5/8 Andrewxie <>:
Quote:
Hi,
how to clamp a shp file onto a ive file?

------------------
Read this topic online here:
http://forum.openscenegraph.org/viewtopic.php?p=11667#11667















------------------
Post generated by Mail2Forum
Back to top
Jason Beverage
Guest





PostPosted: Fri May 08, 2009 3:55 pm    Post subject:
Is osggis updated? Re: shp file and ive file
Reply with quote

Hi Alejandro,

When you say it gets stuck, does it get stuck building the VPB database or does it get stuck when you try to run the osggis_build?

Jason

2009/5/8 Alejandro Aguilar Sierra < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:
Hi,

Good to know, but recently I tried to compile osggis with the current
OSG and VPB branches. It compiles without a problem, but the example
doesn't work. It is stucked building the example.

Does anybody has been successful building the example?

Regards,

-- A.


2009/5/8 Jason Beverage < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi Andrew,

I would recommend using osgGIS for this. It has the capability to make a
paged database from a vector dataset like a shapefile and clamp it to an
existing terrain database (like an IVE).

http://www.osggis.org

Thanks!

Jason

2009/5/8 Jakob Ruhe < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:

Hi Andrewxie!

The ESRIShapeReaderWriter plugin can read ESRI shape files so if you
build that plugin and the ive plugin you can convert a shape file with
something like this:

osg::Node* node = osgDB::readNodeFile("myshape.shp");
osgDB::writerNodeFile(*node, "myhsape.ive");

Good luck!

/Jakob Ruhe

2009/5/8 Andrewxie < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi,
how to clamp a shp file onto a ive file?

------------------
Read this topic online here:
http://forum.openscenegraph.org/viewtopic.php?p=11667#11667





_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)

http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org

_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


------------------
Post generated by Mail2Forum
Back to top
Alejandro Aguilar Sierra
Guest





PostPosted: Fri May 08, 2009 4:08 pm    Post subject:
Is osggis updated? Re: shp file and ive file
Reply with quote

Hi Jason,

When I run osggis_build, it get stuck at some point. Sometimes at 37%,
some others at 46% or 81%. I could left it running for hours and never
go further.

...
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y5.ive: started
[osgGIS] 38/49 tasks (77%) complete, 00:00:00 remaining
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive: started
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive:
completed, time = 6e-06s
[osgGIS] 39/49 tasks (79%) complete, 00:00:00 remaining
[osgGIS] 0> out/buildings/gL0_X4_Y3.ive: completed, time = 2.62004s
[osgGIS] 40/49 tasks (81%) complete, 00:00:00 remaining


-- A.

2009/5/8 Jason Beverage <>:
Quote:
Hi Alejandro,

When you say it gets stuck, does it get stuck building the VPB database or
does it get stuck when you try to run the osggis_build?

Jason

2009/5/8 Alejandro Aguilar Sierra <>
Quote:

Hi,

Good to know, but recently I tried to compile osggis with the current
OSG and VPB branches. It compiles without a problem, but the example
doesn't work. It is stucked building the example.

Does anybody has been successful building the example?

Regards,

-- A.


2009/5/8 Jason Beverage <>:
Quote:
Hi Andrew,

I would recommend using osgGIS for this. It has the capability to make
a
paged database from a vector dataset like a shapefile and clamp it to an
existing terrain database (like an IVE).

http://www.osggis.org

Thanks!

Jason

2009/5/8 Jakob Ruhe <>
Quote:

Hi Andrewxie!

The ESRIShapeReaderWriter plugin can read ESRI shape files so if you
build that plugin and the ive plugin you can convert a shape file with
something like this:

osg::Node* node = osgDB::readNodeFile("myshape.shp");
osgDB::writerNodeFile(*node, "myhsape.ive");

Good luck!

/Jakob Ruhe

2009/5/8 Andrewxie <>:
Quote:
Hi,
how to clamp a shp file onto a ive file?

------------------
Read this topic online here:
http://forum.openscenegraph.org/viewtopic.php?p=11667#11667





















------------------
Post generated by Mail2Forum
Back to top
Glenn Waldron
Guest





PostPosted: Fri May 08, 2009 6:43 pm    Post subject:
Is osggis updated? Re: shp file and ive file
Reply with quote

Try using the "--threads 1" option and see if that helps.

osggis_build --threads 1 project.xml

Glenn Waldron : Pelican Mapping : http://pelicanmapping.com : +1.703.652.4791


2009/5/8 Alejandro Aguilar Sierra < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:
Hi Jason,

When I run osggis_build, it get stuck at some point. Sometimes at 37%,
some others at 46% or 81%. I could left it running for hours and never
go further.

...
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y5.ive: started
[osgGIS] 38/49 tasks (77%) complete, 00:00:00 remaining
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive: started
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive:
completed, time = 6e-06s
[osgGIS] 39/49 tasks (79%) complete, 00:00:00 remaining
[osgGIS] 0> out/buildings/gL0_X4_Y3.ive: completed, time = 2.62004s
[osgGIS] 40/49 tasks (81%) complete, 00:00:00 remaining



-- A.

2009/5/8 Jason Beverage < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi Alejandro,

When you say it gets stuck, does it get stuck building the VPB database or
does it get stuck when you try to run the osggis_build?

Jason

2009/5/8 Alejandro Aguilar Sierra < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:

Hi,

Good to know, but recently I tried to compile osggis with the current
OSG and VPB branches. It compiles without a problem, but the example
doesn't work. It is stucked building the example.

Does anybody has been successful building the example?

Regards,

-- A.


2009/5/8 Jason Beverage < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi Andrew,

I would recommend using osgGIS for this. It has the capability to make
a
paged database from a vector dataset like a shapefile and clamp it to an
existing terrain database (like an IVE).

http://www.osggis.org

Thanks!

Jason

2009/5/8 Jakob Ruhe < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:

Hi Andrewxie!

The ESRIShapeReaderWriter plugin can read ESRI shape files so if you
build that plugin and the ive plugin you can convert a shape file with
something like this:

osg::Node* node = osgDB::readNodeFile("myshape.shp");
osgDB::writerNodeFile(*node, "myhsape.ive");

Good luck!

/Jakob Ruhe

2009/5/8 Andrewxie < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi,
how to clamp a shp file onto a ive file?

------------------
Read this topic online here:
http://forum.openscenegraph.org/viewtopic.php?p=11667#11667





_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)


http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org

_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)

http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)

http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org




------------------
Post generated by Mail2Forum
Back to top
Alejandro Aguilar Sierra
Guest





PostPosted: Wed May 13, 2009 10:58 pm    Post subject:
Is osggis updated? Re: shp file and ive file
Reply with quote

It helps, it apparently finishes the task. Then I run osggis_mapper
and it dies noisily, droping a lot of hardware info:

[osgGIS] Loading map default
[osgGIS] Opened feature store at
source/boston-buildings-downtown-utm19n-meters.shp
Extent = (326354.28860, 4687724.18966 => 332731.03306, 4693913.93281)
SRS = PROJCS["UTM Zone 19, Northern Hemisphere",GEOGCS["Geographic
Coordinate System",DATUM["NAD83",SPHEROID["GRS
1980",6378137,298.2572220960423]],PRIMEM["Greenwich",0],UNIT["degree",0.0174532925199433]],PROJECTION["Transverse_Mercator"],PARAMETER["latitude_of_origin",0],PARAMETER["central_meridian",-69],PARAMETER["scale_factor",0.9996],PARAMETER["false_easting",500000],PARAMETER["false_northing",0],UNIT["Meter",1]]
[...]
4a000-b7f4c000 rwxp 00000000 00:0d 1232 /dev/zero
b7f4c000-b7f4e000 rw-p b7f4c000 00:00 0
b7f4e000-b7f4f000 r-xp b7f4e000 00:00 0 [vdso]
b7f4f000-b7f6b000 r-xp 00000000 08:04 150996684 /lib/ld-2.9.so
b7f6b000-b7f6c000 r--p 0001b000 08:04 150996684 /lib/ld-2.9.so
b7f6c000-b7f6d000 rw-p 0001c000 08:04 150996684 /lib/ld-2.9.so
bfb57000-bfb6b000 rwxp bffeb000 00:00 0 [stack]
bfb6b000-bfb6c000 rw-p bffff000 00:00 0
Aborted


Any hint?

-- A.



2009/5/8 Glenn Waldron <>:
Quote:
Try using the "--threads 1" option and see if that helps.

osggis_build --threads 1 project.xml


Glenn Waldron : Pelican Mapping : http://pelicanmapping.com :
+1.703.652.4791


2009/5/8 Alejandro Aguilar Sierra <>
Quote:

Hi Jason,

When I run osggis_build, it get stuck at some point. Sometimes at 37%,
some others at 46% or 81%. I could left it running for hours and never
go further.

...
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y5.ive:
started
[osgGIS] 38/49 tasks (77%) complete, 00:00:00 remaining
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive:
started
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive:
completed, time = 6e-06s
[osgGIS] 39/49 tasks (79%) complete, 00:00:00 remaining
[osgGIS] 0> out/buildings/gL0_X4_Y3.ive: completed, time = 2.62004s
[osgGIS] 40/49 tasks (81%) complete, 00:00:00 remaining


-- A.

2009/5/8 Jason Beverage <>:
Quote:
Hi Alejandro,

When you say it gets stuck, does it get stuck building the VPB database
or
does it get stuck when you try to run the osggis_build?

Jason

2009/5/8 Alejandro Aguilar Sierra <>
Quote:

Hi,

Good to know, but recently I tried to compile osggis with the current
OSG and VPB branches. It compiles without a problem, but the example
doesn't work. It is stucked building the example.

Does anybody has been successful building the example?

Regards,

-- A.


2009/5/8 Jason Beverage <>:
Quote:
Hi Andrew,

I would recommend using osgGIS for this. It has the capability to
make
a
paged database from a vector dataset like a shapefile and clamp it to
an
existing terrain database (like an IVE).

http://www.osggis.org

Thanks!

Jason

2009/5/8 Jakob Ruhe <>
Quote:

Hi Andrewxie!

The ESRIShapeReaderWriter plugin can read ESRI shape files so if you
build that plugin and the ive plugin you can convert a shape file
with
something like this:

osg::Node* node = osgDB::readNodeFile("myshape.shp");
osgDB::writerNodeFile(*node, "myhsape.ive");

Good luck!

/Jakob Ruhe

2009/5/8 Andrewxie <>:
Quote:
Hi,
how to clamp a shp file onto a ive file?

------------------
Read this topic online here:
http://forum.openscenegraph.org/viewtopic.php?p=11667#11667



























------------------
Post generated by Mail2Forum
Back to top
Glenn Waldron
Guest





PostPosted: Thu May 14, 2009 1:35 am    Post subject:
Is osggis updated? Re: shp file and ive file
Reply with quote

No clue. Can you run in debug and produce a stack trace?

Glenn Waldron : Pelican Mapping


2009/5/13 Alejandro Aguilar Sierra < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:
It helps, it apparently finishes the task. Then I run osggis_mapper
and it dies noisily, droping a lot of hardware info:

[osgGIS] Loading map default
[osgGIS] Opened feature store at
source/boston-buildings-downtown-utm19n-meters.shp
Extent = (326354.28860, 4687724.18966 => 332731.03306, 4693913.93281)
SRS = PROJCS["UTM Zone 19, Northern Hemisphere",GEOGCS["Geographic
Coordinate System",DATUM["NAD83",SPHEROID["GRS
1980",6378137,298.2572220960423]],PRIMEM["Greenwich",0],UNIT["degree",0.0174532925199433]],PROJECTION["Transverse_Mercator"],PARAMETER["latitude_of_origin",0],PARAMETER["central_meridian",-69],PARAMETER["scale_factor",0.9996],PARAMETER["false_easting",500000],PARAMETER["false_northing",0],UNIT["Meter",1]]
[...]
4a000-b7f4c000 rwxp 00000000 00:0d 1232 /dev/zero
b7f4c000-b7f4e000 rw-p b7f4c000 00:00 0
b7f4e000-b7f4f000 r-xp b7f4e000 00:00 0 [vdso]
b7f4f000-b7f6b000 r-xp 00000000 08:04 150996684 /lib/ld-2.9.so
b7f6b000-b7f6c000 r--p 0001b000 08:04 150996684 /lib/ld-2.9.so
b7f6c000-b7f6d000 rw-p 0001c000 08:04 150996684 /lib/ld-2.9.so
bfb57000-bfb6b000 rwxp bffeb000 00:00 0 [stack]
bfb6b000-bfb6c000 rw-p bffff000 00:00 0
Aborted


Any hint?

-- A.



2009/5/8 Glenn Waldron < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:

Quote:
Try using the "--threads 1" option and see if that helps.

osggis_build --threads 1 project.xml


Glenn Waldron : Pelican Mapping : http://pelicanmapping.com :
+1.703.652.4791


2009/5/8 Alejandro Aguilar Sierra < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:

Hi Jason,

When I run osggis_build, it get stuck at some point. Sometimes at 37%,
some others at 46% or 81%. I could left it running for hours and never
go further.

...
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y5.ive:
started
[osgGIS] 38/49 tasks (77%) complete, 00:00:00 remaining
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive:
started
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive:
completed, time = 6e-06s
[osgGIS] 39/49 tasks (79%) complete, 00:00:00 remaining
[osgGIS] 0> out/buildings/gL0_X4_Y3.ive: completed, time = 2.62004s
[osgGIS] 40/49 tasks (81%) complete, 00:00:00 remaining


-- A.

2009/5/8 Jason Beverage < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi Alejandro,

When you say it gets stuck, does it get stuck building the VPB database
or
does it get stuck when you try to run the osggis_build?

Jason

2009/5/8 Alejandro Aguilar Sierra < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:

Hi,

Good to know, but recently I tried to compile osggis with the current
OSG and VPB branches. It compiles without a problem, but the example
doesn't work. It is stucked building the example.

Does anybody has been successful building the example?

Regards,

-- A.


2009/5/8 Jason Beverage < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi Andrew,

I would recommend using osgGIS for this. It has the capability to
make
a
paged database from a vector dataset like a shapefile and clamp it to
an
existing terrain database (like an IVE).

http://www.osggis.org

Thanks!

Jason

2009/5/8 Jakob Ruhe < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:

Hi Andrewxie!

The ESRIShapeReaderWriter plugin can read ESRI shape files so if you
build that plugin and the ive plugin you can convert a shape file
with
something like this:

osg::Node* node = osgDB::readNodeFile("myshape.shp");
osgDB::writerNodeFile(*node, "myhsape.ive");

Good luck!

/Jakob Ruhe

2009/5/8 Andrewxie < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi,
how to clamp a shp file onto a ive file?

------------------
Read this topic online here:
http://forum.openscenegraph.org/viewtopic.php?p=11667#11667





_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)



http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org

_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)


http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)


http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)

http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)

http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org




------------------
Post generated by Mail2Forum
Back to top
Jason Beverage
Guest





PostPosted: Thu May 14, 2009 3:16 am    Post subject:
Is osggis updated? Re: shp file and ive file
Reply with quote

Hi Alejandro,

I just tried the latest osgGIS against OSG 2.8.0 on Linux and get segfaults as well. I'm doing a debug build of OSG and osgGIS to hopefully track down what is going on. I"ll probably get to it sometime tommorow.

Thanks!

Jason

2009/5/13 Glenn Waldron < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:
No clue. Can you run in debug and produce a stack trace?

Glenn Waldron : Pelican Mapping


2009/5/13 Alejandro Aguilar Sierra < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>

Quote:
It helps, it apparently finishes the task. Then I run osggis_mapper
and it dies noisily, droping a lot of hardware info:

[osgGIS] Loading map default
[osgGIS] Opened feature store at
source/boston-buildings-downtown-utm19n-meters.shp
Extent = (326354.28860, 4687724.18966 => 332731.03306, 4693913.93281)
SRS = PROJCS["UTM Zone 19, Northern Hemisphere",GEOGCS["Geographic
Coordinate System",DATUM["NAD83",SPHEROID["GRS
1980",6378137,298.2572220960423]],PRIMEM["Greenwich",0],UNIT["degree",0.0174532925199433]],PROJECTION["Transverse_Mercator"],PARAMETER["latitude_of_origin",0],PARAMETER["central_meridian",-69],PARAMETER["scale_factor",0.9996],PARAMETER["false_easting",500000],PARAMETER["false_northing",0],UNIT["Meter",1]]
[...]
4a000-b7f4c000 rwxp 00000000 00:0d 1232 /dev/zero
b7f4c000-b7f4e000 rw-p b7f4c000 00:00 0
b7f4e000-b7f4f000 r-xp b7f4e000 00:00 0 [vdso]
b7f4f000-b7f6b000 r-xp 00000000 08:04 150996684 /lib/ld-2.9.so
b7f6b000-b7f6c000 r--p 0001b000 08:04 150996684 /lib/ld-2.9.so
b7f6c000-b7f6d000 rw-p 0001c000 08:04 150996684 /lib/ld-2.9.so
bfb57000-bfb6b000 rwxp bffeb000 00:00 0 [stack]
bfb6b000-bfb6c000 rw-p bffff000 00:00 0
Aborted


Any hint?

-- A.



2009/5/8 Glenn Waldron < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:

Quote:
Try using the "--threads 1" option and see if that helps.

osggis_build --threads 1 project.xml


Glenn Waldron : Pelican Mapping : http://pelicanmapping.com :
+1.703.652.4791


2009/5/8 Alejandro Aguilar Sierra < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:

Hi Jason,

When I run osggis_build, it get stuck at some point. Sometimes at 37%,
some others at 46% or 81%. I could left it running for hours and never
go further.

...
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y5.ive:
started
[osgGIS] 38/49 tasks (77%) complete, 00:00:00 remaining
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive:
started
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive:
completed, time = 6e-06s
[osgGIS] 39/49 tasks (79%) complete, 00:00:00 remaining
[osgGIS] 0> out/buildings/gL0_X4_Y3.ive: completed, time = 2.62004s
[osgGIS] 40/49 tasks (81%) complete, 00:00:00 remaining


-- A.

2009/5/8 Jason Beverage < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi Alejandro,

When you say it gets stuck, does it get stuck building the VPB database
or
does it get stuck when you try to run the osggis_build?

Jason

2009/5/8 Alejandro Aguilar Sierra < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:

Hi,

Good to know, but recently I tried to compile osggis with the current
OSG and VPB branches. It compiles without a problem, but the example
doesn't work. It is stucked building the example.

Does anybody has been successful building the example?

Regards,

-- A.


2009/5/8 Jason Beverage < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi Andrew,

I would recommend using osgGIS for this. It has the capability to
make
a
paged database from a vector dataset like a shapefile and clamp it to
an
existing terrain database (like an IVE).

http://www.osggis.org

Thanks!

Jason

2009/5/8 Jakob Ruhe < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:

Hi Andrewxie!

The ESRIShapeReaderWriter plugin can read ESRI shape files so if you
build that plugin and the ive plugin you can convert a shape file
with
something like this:

osg::Node* node = osgDB::readNodeFile("myshape.shp");
osgDB::writerNodeFile(*node, "myhsape.ive");

Good luck!

/Jakob Ruhe

2009/5/8 Andrewxie < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi,
how to clamp a shp file onto a ive file?

------------------
Read this topic online here:
http://forum.openscenegraph.org/viewtopic.php?p=11667#11667





_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)



http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org

_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)


http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)


http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)

http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)

http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org







_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org



------------------
Post generated by Mail2Forum
Back to top
Jason Beverage
Guest





PostPosted: Thu May 14, 2009 1:56 pm    Post subject:
Is osggis updated? Re: shp file and ive file
Reply with quote

Hi Alejandro,

I'm currently having issues with my Linux dev environment, I'm going to need to rebuild it to get things rolling again. I primarily work in Windows, and things work fine there.

Can you build in debug and try to get a stack trace as Glenn suggested?

Thanks!

Jason

2009/5/13 Jason Beverage < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:
Hi Alejandro,

I just tried the latest osgGIS against OSG 2.8.0 on Linux and get segfaults as well. I'm doing a debug build of OSG and osgGIS to hopefully track down what is going on. I"ll probably get to it sometime tommorow.

Thanks!

Jason

2009/5/13 Glenn Waldron < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>

Quote:
No clue. Can you run in debug and produce a stack trace?

Glenn Waldron : Pelican Mapping


2009/5/13 Alejandro Aguilar Sierra < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>

Quote:
It helps, it apparently finishes the task. Then I run osggis_mapper
and it dies noisily, droping a lot of hardware info:

[osgGIS] Loading map default
[osgGIS] Opened feature store at
source/boston-buildings-downtown-utm19n-meters.shp
Extent = (326354.28860, 4687724.18966 => 332731.03306, 4693913.93281)
SRS = PROJCS["UTM Zone 19, Northern Hemisphere",GEOGCS["Geographic
Coordinate System",DATUM["NAD83",SPHEROID["GRS
1980",6378137,298.2572220960423]],PRIMEM["Greenwich",0],UNIT["degree",0.0174532925199433]],PROJECTION["Transverse_Mercator"],PARAMETER["latitude_of_origin",0],PARAMETER["central_meridian",-69],PARAMETER["scale_factor",0.9996],PARAMETER["false_easting",500000],PARAMETER["false_northing",0],UNIT["Meter",1]]
[...]
4a000-b7f4c000 rwxp 00000000 00:0d 1232 /dev/zero
b7f4c000-b7f4e000 rw-p b7f4c000 00:00 0
b7f4e000-b7f4f000 r-xp b7f4e000 00:00 0 [vdso]
b7f4f000-b7f6b000 r-xp 00000000 08:04 150996684 /lib/ld-2.9.so
b7f6b000-b7f6c000 r--p 0001b000 08:04 150996684 /lib/ld-2.9.so
b7f6c000-b7f6d000 rw-p 0001c000 08:04 150996684 /lib/ld-2.9.so
bfb57000-bfb6b000 rwxp bffeb000 00:00 0 [stack]
bfb6b000-bfb6c000 rw-p bffff000 00:00 0
Aborted


Any hint?

-- A.



2009/5/8 Glenn Waldron < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:

Quote:
Try using the "--threads 1" option and see if that helps.

osggis_build --threads 1 project.xml


Glenn Waldron : Pelican Mapping : http://pelicanmapping.com :
+1.703.652.4791


2009/5/8 Alejandro Aguilar Sierra < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:

Hi Jason,

When I run osggis_build, it get stuck at some point. Sometimes at 37%,
some others at 46% or 81%. I could left it running for hours and never
go further.

...
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y5.ive:
started
[osgGIS] 38/49 tasks (77%) complete, 00:00:00 remaining
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive:
started
[osgGIS] 1> /home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive:
completed, time = 6e-06s
[osgGIS] 39/49 tasks (79%) complete, 00:00:00 remaining
[osgGIS] 0> out/buildings/gL0_X4_Y3.ive: completed, time = 2.62004s
[osgGIS] 40/49 tasks (81%) complete, 00:00:00 remaining


-- A.

2009/5/8 Jason Beverage < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi Alejandro,

When you say it gets stuck, does it get stuck building the VPB database
or
does it get stuck when you try to run the osggis_build?

Jason

2009/5/8 Alejandro Aguilar Sierra < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:

Hi,

Good to know, but recently I tried to compile osggis with the current
OSG and VPB branches. It compiles without a problem, but the example
doesn't work. It is stucked building the example.

Does anybody has been successful building the example?

Regards,

-- A.


2009/5/8 Jason Beverage < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi Andrew,

I would recommend using osgGIS for this. It has the capability to
make
a
paged database from a vector dataset like a shapefile and clamp it to
an
existing terrain database (like an IVE).

http://www.osggis.org

Thanks!

Jason

2009/5/8 Jakob Ruhe < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>
Quote:

Hi Andrewxie!

The ESRIShapeReaderWriter plugin can read ESRI shape files so if you
build that plugin and the ive plugin you can convert a shape file
with
something like this:

osg::Node* node = osgDB::readNodeFile("myshape.shp");
osgDB::writerNodeFile(*node, "myhsape.ive");

Good luck!

/Jakob Ruhe

2009/5/8 Andrewxie < (
Only registered users can see emails on this board!
Get registred or enter the forums!
)>:
Quote:
Hi,
how to clamp a shp file onto a ive file?

------------------
Read this topic online here:
http://forum.openscenegraph.org/viewtopic.php?p=11667#11667





_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)



http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org

_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)


http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)


http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)

http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)

http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org


_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org







_______________________________________________
osg-users mailing list
(
Only registered users can see emails on this board!
Get registred or enter the forums!
)
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org







------------------
Post generated by Mail2Forum
Back to top
Alejandro Aguilar Sierra
Guest





PostPosted: Thu May 14, 2009 2:12 pm    Post subject:
Is osggis updated? Re: shp file and ive file
Reply with quote

Sure, I'll try it tomorrow.

Regards,

-- A.

2009/5/14 Jason Beverage <>:
Quote:
Hi Alejandro,

I'm currently having issues with my Linux dev environment, I'm going to need
to rebuild it to get things rolling again. I primarily work in Windows, and
things work fine there.

Can you build in debug and try to get a stack trace as Glenn suggested?

Thanks!

Jason

2009/5/13 Jason Beverage <>
Quote:

Hi Alejandro,

I just tried the latest osgGIS against OSG 2.8.0 on Linux and get
segfaults as well. I'm doing a debug build of OSG and osgGIS to hopefully
track down what is going on. I"ll probably get to it sometime tommorow.

Thanks!

Jason

2009/5/13 Glenn Waldron <>
Quote:

No clue. Can you run in debug and produce a stack trace?


Glenn Waldron : Pelican Mapping


2009/5/13 Alejandro Aguilar Sierra <>
Quote:

It helps, it apparently finishes the task. Then I run osggis_mapper
and it dies noisily, droping a lot of hardware info:

[osgGIS] Loading map default
[osgGIS] Opened feature store at
source/boston-buildings-downtown-utm19n-meters.shp
Extent = (326354.28860, 4687724.18966 => 332731.03306, 4693913.93281)
SRS = PROJCS["UTM Zone 19, Northern Hemisphere",GEOGCS["Geographic
Coordinate System",DATUM["NAD83",SPHEROID["GRS

1980",6378137,298.2572220960423]],PRIMEM["Greenwich",0],UNIT["degree",0.0174532925199433]],PROJECTION["Transverse_Mercator"],PARAMETER["latitude_of_origin",0],PARAMETER["central_meridian",-69],PARAMETER["scale_factor",0.9996],PARAMETER["false_easting",500000],PARAMETER["false_northing",0],UNIT["Meter",1]]
[...]
4a000-b7f4c000 rwxp 00000000 00:0d 1232 /dev/zero
b7f4c000-b7f4e000 rw-p b7f4c000 00:00 0
b7f4e000-b7f4f000 r-xp b7f4e000 00:00 0 [vdso]
b7f4f000-b7f6b000 r-xp 00000000 08:04 150996684 /lib/ld-2.9.so
b7f6b000-b7f6c000 r--p 0001b000 08:04 150996684 /lib/ld-2.9.so
b7f6c000-b7f6d000 rw-p 0001c000 08:04 150996684 /lib/ld-2.9.so
bfb57000-bfb6b000 rwxp bffeb000 00:00 0 [stack]
bfb6b000-bfb6c000 rw-p bffff000 00:00 0
Aborted


Any hint?

-- A.



2009/5/8 Glenn Waldron <>:
Quote:
Try using the "--threads 1" option and see if that helps.

osggis_build --threads 1 project.xml


Glenn Waldron : Pelican Mapping : http://pelicanmapping.com :
+1.703.652.4791


2009/5/8 Alejandro Aguilar Sierra <>
Quote:

Hi Jason,

When I run osggis_build, it get stuck at some point. Sometimes at
37%,
some others at 46% or 81%. I could left it running for hours and
never
go further.

...
[osgGIS] 1>
/home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y5.ive:
started
[osgGIS] 38/49 tasks (77%) complete, 00:00:00 remaining
[osgGIS] 1>
/home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive:
started
[osgGIS] 1>
/home/ale/3d/gis/boston-sample/out/buildings/gL0_X6_Y6.ive:
completed, time = 6e-06s
[osgGIS] 39/49 tasks (79%) complete, 00:00:00 remaining
[osgGIS] 0> out/buildings/gL0_X4_Y3.ive: completed, time = 2.62004s
[osgGIS] 40/49 tasks (81%) complete, 00:00:00 remaining


-- A.

2009/5/8 Jason Beverage <>:
Quote:
Hi Alejandro,

When you say it gets stuck, does it get stuck building the VPB
database
or
does it get stuck when you try to run the osggis_build?

Jason

2009/5/8 Alejandro Aguilar Sierra <>
Quote:

Hi,

Good to know, but recently I tried to compile osggis with the
current
OSG and VPB branches. It compiles without a problem, but the
example
doesn't work. It is stucked building the example.

Does anybody has been successful building the example?

Regards,

-- A.


2009/5/8 Jason Beverage <>:
Quote:
Hi Andrew,

I would recommend using osgGIS for this. It has the capability
to
make
a
paged database from a vector dataset like a shapefile and clamp
it to
an
existing terrain database (like an IVE).

http://www.osggis.org

Thanks!

Jason

2009/5/8 Jakob Ruhe <>
Quote:

Hi Andrewxie!

The ESRIShapeReaderWriter plugin can read ESRI shape files so
if you
build that plugin and the ive plugin you can convert a shape
file
with
something like this:

osg::Node* node = osgDB::readNodeFile("myshape.shp");
osgDB::writerNodeFile(*node, "myhsape.ive");

Good luck!

/Jakob Ruhe

2009/5/8 Andrewxie <>:
Quote:
Hi,
how to clamp a shp file onto a ive file?

------------------
Read this topic online here:
http://forum.openscenegraph.org/viewtopic.php?p=11667#11667






































------------------
Post generated by Mail2Forum
Back to top
Display posts from previous:   
Post new topic   Reply to topic    OpenSceneGraph Forum Forum Index -> General [3rdparty] All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Similar Topics
Topic Author Forum Replies Posted
No new posts Convert .earth file to .osg format stevenj279 General 28 Mon Apr 22, 2019 5:05 am View latest post
No new posts EditorConfig file? AnyOldName3 General 13 Thu Mar 14, 2019 12:02 am View latest post
No new posts Change color of node read from dxf file dhhabyc General 10 Sat Nov 17, 2018 12:58 pm View latest post
No new posts How to actually play animation in osg... Warren93 General 3 Tue Oct 23, 2018 1:23 pm View latest post
No new posts Load an obj file and mapping a given ... aaa3d General 3 Mon Aug 06, 2018 2:27 pm View latest post


Board Security Anti Bot Question MOD - phpBB MOD against Spam Bots
Powered by phpBB © 2001, 2005 phpBB Group
Protected by Anti-Spam ACP